Repeater Information – W7SAA

Repeater Site Electric is Almost Done

Mike Reed — Sat, 10 Jun 2023 03:36:15 +0000

Thanks to Jay WB6RDV we now have power and lights at the site. One more outlet to wire and we are done. We should have it all wrapped by end of next week. Here are some more pictures of the progress. We thank Jay for all the work he is doing it looks great.

Jay WB6RDV wiring an outlet.

Finished Outlets

Jay WB6RDV Lighting the new site up.

More Progress on Repeater Site

Mike Reed — Sun, 04 Jun 2023 04:18:03 +0000

This week we made more progress at the repeater site. As you will see from the pictures below all but the last section of the tower is up (Thank You Mark Doucette – KI7FZV). The building is in place and we have it insulated with OSB on the walls and just need to complete the OSB on the ceiling. Next week we are hoping to get the electric installed. We will post more on the progress as it happens.

Carl – KF7BBR and Mike – KJ7BRF picking up tools after getting the inside walls done.

Looking at the front of the site while work in progress.

Back of site showing the last section of tower ready for some antennas.

Chris – KJ7UYT admiring his handy work.

Insulation being installed in the ceiling.

Tower Foundation Poured!

KJ7UYT — Fri, 05 May 2023 22:21:01 +0000

Progress has been made at the repeater site. The foundation for the new tower has been poured! Thank you goes out to everyone involved with the club that has had a hand in keeping this project moving along.

Special thanks goes to Mark and his wife Vikki, to Carl and to Jay for being available to go on site the day of the pour!